11
Illus 15
7)
Repeat steps 1 through 6 for the other side.
8)
Bleed front brakes.
A
FT
B
RACE
I
NSTALLATION
1)
Using a silicon spray, lubricate two bushings
(520041) and one sleeve (420042) from kit 860474.
Press the bushings and sleeve into aft brace 176132B
as shown in illustration 16.
2)
Repeat step 1 to install the rest of the bushings
and sleeves.
3)
Loosely attach the aft braces to subframe
176385B with the hardware from kit 860474. See
illustration 16.
NOTE: Both aft braces should angle slightly outward
from front to rear.
4)
If applicable, remove the transfer case skid
plate.
Illus. 16
5)
For 2WD vehicles, temporarily attach aft brace
bracket 176138 to the aft brace as shown in illustration
16. Using the slotted hole in the bracket as a template
mark the mounting hole location on the transmission
crossmember. Drill a 1/2” hole at the marked location.
Remove bracket. Repeat for other side.