14
Illus. 22
B
UMP
S
TOP
S
PACER
I
NSTALLATION
1)
Remove the bolt holding the bump stop to the
frame bracket. Remove the bump stop.
2)
Place bump stop spacer 176477 against frame
bracket. Attach original bump stop to spacer with the
10mm hardware from kit 860582.
Illus. 23
3)
Repeat steps 1 and 2 for the other side.
4)
Install rear wheels and lower vehicle to
ground. Tighten lug nuts to 140 ft. lbs.
B
RAKE
L
INE
B
RACKET
I
NSTALLATION
1)
Attach the new brake line bracket 170014 to the
rear differential with the 8mm hardware from kit
860569. See illustration 24.
2)
Carefully reshape the brake line and attach the
junction block to the top of bracket 170014. Use the
5/16” hardware from kit 860569.
3)
Reattach the brake line to the rear axle with the
two original bolts.
Illus. 24
