15
FINAL CHECKS & ADJUSTMENTS
1)
Turn the front wheels completely left then
right. Verify adequate tire, wheel, and brake hose
clearance. Inspect steering and suspension for
tightness and proper operation.
2)
With the suspension at maximum extension
(full droop), inspect and rotate all axles and drive
shafts. Check for binding and proper slip yoke
insertion. The slip yoke should be inserted a minimum
of one inch into the transfer case and/or transmission.
3)
Ensure that the vehicle brake system operates
correctly. If new brake hoses were installed, verify
that each hose allows for full suspension movement.
4)
Readjust headlamps. Have vehicle Aligned at
a certified alignment facility.
Recommended Alignment Specifications
Caster (degrees): 4.5° ± 1.0°
Camber (degrees): 0° - neg .3°
Sum Toe In (degrees): .1° ± .2°
Please retain this publication for future reference.
See Important Note Q.
