8.
Install enclosed dust boot (see illustration 4)
9.
Attach tie rod bracket RS176511B to the new stabilizer
shock with enclosed 12mm hardware (see illustration 4).
10.
Extend new stabilizer shock halfway.
11.
Attach tie rod bracket 176511B to the top of the tie rod
tube. For a 2007-2010 MY JK you will use the OE U-bolts.
Use the supplied U-bolts for a 2011 and newer JK. Angle
bracket slightly forward.
12.
Tighten all nuts and bolts securely.
13.
Turn wheels completely in both directions. Verify that
the steering stops make contact and the stabilizer shock does
not bottom out. Verify that the stabilizer shock does not
bind or interfere with other components.
Illustration 4
Tie Rod
Bracket
OE or
Supplied
U-Bolts
