Dear Randall Owner,
Congratulations on the purchase of your new Randall Amplifier, and thank you for the support of
our product line. Randall amps are made to strict quality and consistent performance standards,
that will provide you with years of musical satisfaction. Please read the following manual, before
operating your new Warhead X2 guitar amplifier. The revolutionary X2 will take hi-gain
amplification to new heights, and your journey begins today. If you ever have any questions or
comments, please contact us anytime. Enjoy your new purchase!
Warnings:
-Do not block any ventilation openings on the sides or rear of the preamp. Always give four inches of proper venti-
lation to the rear of the preamp.
-Do not expose the amplifier to rain, moisture, dripping or splashing water. Do not place objects filled with liquids
on or nearby the amplifier.
-Do not expose the amplifier to direct sunlight or extremely high temperatures. Always unplug the AC power cord
before changing fuses or tubes. When replacing fuses, use only the same type and rating.
-Be sure to connect to an AC power supply that meets the power supply that meets the power supply specification,
listed on the rear fuse holder.
-If there is any danger of lightning occurring nearby, remove the power plug from the wall socket in advance.
-Do not use excessive force in handling control buttons, switches and controls. Do not use solvents to clean the
unit, wipe off the exterior with soft cloth.
