1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Custom
SC Refrigerated Storage
models 51000LPPO
Description:
Self-Contained drawer base refrigerator storage units with mechanically
cooled pan opening. These units are offered in variety of lengths to meet
your specific base storage or pan storage requirements. The mechanically
cooled pan opening uses Randell’s exclusive design technologies, such as
our Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). Automatic hot gas evaporator is provided for eliminating the base
coil’s condensation. The base is designed with a “low-profile” cabinet and
is supplied with a plate shelf above the refrigerated openings.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambi
ent tem-
perature of 86˚F (30˚C) or less.
model 51375LPPO shown with:
•optional finished end
•pan covers removed
•standard backsplash removed
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top fitted with
recessed heavy duty steel bars for field bolting units together, producing
a hairline seam. Hinged louver panel to be stainless steel. Exterior body
to be corrosion resistant steel. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work surface to be at
36" work height. Legs to be 6" high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be moved left
to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets -
(designed for installation & removal without tools).
REFRIGERATION: System is a balanced heavy duty R-404A refrigerant sys-
tem with an energy efficient hot gas automatic defrost (for base evaporator
coil). The base is cooled by an independent blower coiled operating on its
own expansion valve and thermostat and operates through a dedicated
solenoid valve. A pressure control is provided to operate the condensing
unit on demand. The pan opening is provided with its own thermostat
(located in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is located above the louver panel.
Standard Features:
• “Low-profile” refrigerated cabinet with plate shelf above
• Low profile 2" recess pan design provides easy reach and
optimal pan temperatures & reliability
• Balanced (extra) high capacity refrigeration system with expansion valve
metering-able to handle peak period demands
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
-
A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged louver for easy access
• Hinged Removable stainless steel covers
• Automatic base defrost with hot gas evaporator
• Foamed in place urethane insulation providing superior insulation
and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common ass'y
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Front breathing louver design allows sealing to wall & curb
mounting without special requirements
Specifications:
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Wide pan opening
Randell Custom, Page 19a
Revised 09/04
model
51342LPPO
51350LPPO
51355LPPO
51367LPPO
51372LPPO
51375LPPO
51380LPPO
51385LPPO
51397LPPO
