1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Custom
Open Base Equipment Stand
models 21000
Description:
Open shelving cooking equipment stand with reinforced stainless
steel equipment shelf. Integral backsplash with 45˚ return.
Reinforced stainless steel storage shelf. 6" high adjustable and
movable legs.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• 10" wide x 1 1/4” thick laminated maple work board
• If unit is fitted with vent, then backsplash will be 3” thick
to meet NFPA 96
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of die-
formed stainless steel with 2” nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Ends
at top fitted with recessed heavy duty steel bars for splining units
together, producing a hairline seam. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4”.
(If fitted with vent system, standard backsplash to be omitted
and unit fitted with 3” thick backsplash to meet NFPA 96). 10”
wide x 1 1/4” thick laminated maple cutting board provided with
removable supports. Bottom shelf to be 22 gauge stainless steel
with marine edge at front, 6 5/8” removable coved cornered turn
up at rear, and integrally welded channel bracing. Legs to be 6”
high stainless steel with adjustable bullet foot. Legs mounted to
full length channel frame assembly which is integrally welded
to bottom of assembly. Legs can be moved left to right to avoid
floor obstacles during installation.
Shown with optional
finished end.
Randell Custom, Page 4
Revised 08/05
model
21348
21360
21372
21384
21396
213108
213120
29" Deep Equipment
Length 48" 60" 72" 84” 96” 108” 120”
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 254 lbs. 296 lbs. 345 lbs. 393 lbs. 437 lbs. 476 lbs. 520 lbs.
33" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Model No. 21348 21360 21372 21384 21396 21608 21620
Height* 36" 36" 36" 36" 36" 36" 36"
Ship Wt. 254 lbs. 296 lbs. 345 lbs. 393 lbs. 437 lbs. 476 lbs. 520 lbs.
• Top shelf depth is 25" deep on 29" deep equipment.
• Bottom shelf depth is 23 1/8" deep on 29" deep equipment.
• Top shelf depth is 29" deep on 33" deep equipment.
• Bottom shelf depth is 23 1/8" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
