1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Specifications subject to change without notice.
For the most current specs, visit unifiedbrands.net.
Custom
Remote Full View Display Case
models 43000A
Description:
Remote refrigerated display unit with insulated self-closing glass
doors in upper display structure. Display area with stainless
steel interior, (2) angled display mirrors, (4) display shelves
and side mounted illumination. Refrigerated storage base with
service ledge and stainless steel doors on concealed hinges.
Evaporator blower coils with expansion valve, and refrigeration
lines supplied and installed. Condensing unit and controls not
provided. Unit has 6" high adjustable and movable legs. Available
as a Pass-Thru unit.
model 43250A shown
CABINET EXTERIOR: Cabinet body is constructed of all metal. Service
ledge to be one piece of die-formed 16 gauge stainless steel with 2
1/2" nosing. Ends at top fitted with recessed heavy duty steel bars for
field bolting units together, producing a hairline seam. Upper display
structure; to have stainless steel exterior and interior sides. Self-closing,
thermalpane glass doors that are easily removable for cleaning, riding in
nylon track. Base; Door opening frames to be ABS and contain magnetic
strip for positive sealing of gaskets. Exterior body to be painted corrosion
resistant steel. Unit totally prewired to junction box. Legs to be 6" high
with adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of assembly. Legs to be
movable left to right to avoid floor obstacles.
CABINET INTERIOR: Upper display structure; (4) powder coated wire
shelves provided, with (2) angled display mirrors. Illumination to be
provided by (2) fluorescent fixtures, (1) per side, removable without
the need for tools. Base; interior to be ABS thermoplastic at ends
only. Stainless steel interior liner to be coved cornered to form bottom
and back. One powder coated finished shelf provided behind each
door. Upperstructure, and base with high density, CFC free, urethane
expanding foam.
UPPER DOORS: (2) removable, insulated sliding glass doors are self-
closing on ball bearings riding in nylon track for smooth operation.
Rubber wiper between doors to minimize air loss, and vinyl frame to
reduce condensation. Door locking system is standard. Doors are easily
removed for cleaning.
BASE DOORS: Stainless steel front with easy to grasp stainless handles,
mounted on heavy duty concealed hinges. Hinges are all stainless steel
with bronze pivot pin in nylon bushing, spring loaded to be self-closing.
Doors with foamed in place insulation, and magnetic gaskets.
Standard Features:
• Evaporator blower coils with expansion valve and
refrigeration lines provided and installed for use with R-134a
refrigerant (specify otherwise)
• Display area illuminated from sides for shadow free display
• Fluorescent illumination
• Adjustable shelving
• Insulated glass doors are self-closing and easily removed for
cleaning
• Foamed in place “CFC free” urethane insulation
• Separate coil for upperstructure for more effective cooling of
display area
• 6" high legs—adjustable and movable
• Filter dryer installed on liquid line
Specifications:
REFRIGERATION: Base and upperstructure supplied with separate refrigeration
coils. Expansion valve and refrigeration lines provided and installed for connection
at unit rear (specify refrigerant if other than R-134a). Condensing unit and controls
not provided. Unit totally prewired and to be supplied with 8' cordset for 115V plug-
in operation.
PASS THRU Model Same as above except to have (2) sets of self-closing
doors, and no angled display mirrors or mirrored back. (4) fluorescent
fixtures-(2) per side provided.
Randell Custom, Page 14
Revised 07/06
model
43350A
43362A
43374A
43250PA
43262PA
43274PA
43350PA
43362PA
43374PA
