background image

 

8          

888-994-7636

 

 
 
CANCELLATIONS 
Orders 

canceled 

prior 

to 

production 

scheduling 

entered 

into 

engineering/production  and  cancelled  are  subject  to  a  cancellation  charge 
(contact factory for details). 
 
STORAGE CHARGES 
Unified  Brands  makes  every  effort  to  consistently  meet  our  customer’s 
shipment  expectations.    If  after  the  equipment  has  been  fabricated,  the 
customer requests delay in shipment, and warehousing is required: 
 

1.  Equipment  held  for  shipment  at  purchasers  request  for  a  period  of  30 

days  beyond  original  delivery  date  specified  will  be  invoiced  and 
become immediately payable. 

2.  Equipment  held  beyond  30  days  after  the  original  delivery  date 

specified will also include storage charges. 

 
SHIPPING & DELIVERY 
Unified  Brands  will  attempt  to  comply  with  any  shipping,  routing  or  carrier 
request  designated  by  dealer,  but  reserves  the  right  to  ship  merchandise  via 
any  responsible  carrier  at  the  time  equipment  is  ready  for  shipment.    Unified 
Brands  will  not  be  held  responsible  for  any  carrier  rate  differences;  rate 
differences  are  entirely between  the  carrier  and  purchaser.    Point  of  shipping 
shall  be  determined  by  Unified  Brands  (Weidman,  MI/Prior,  OK).    At  dealer’s 
request,  Unified  Brands  will  endeavor  whenever  practical  to  meet  dealer’s 
request.  Freight charges to be collect unless otherwise noted. 
 
DAMAGES 
All  crating  conforms  to  general  motor  carrier  specifications.    To  avoid 
concealed  damage,  we  recommend  inspection  of  every  carton  upon  receipt.  
In  the  event  the  item  shows  rough  handling  or  visible  damage  to  minimize 
liability, a full inspection is necessary upon arrival.  Appearance of damage will 
require removing the crate in the presence of the driver.  A notation must be 
placed on the freight bill and signed for by the truck driver at the time of 
delivery.  
 Any and all freight damage that occurs to a Unified Brands piece of 
equipment as a result of carrier handling is not considered under warranty, and 
is not covered under warranty guidelines.  Any freight damage incurred during 
shipping  needs  to  have  a  freight  claim  filed  by  the  receiver  with  the  shipping 
carrier.    Consignee  is  responsible  for  filing  of  freight  claims  when  a  clear 
delivery  receipt  is  signed.    Claims  for  damages  must  be  filed  immediately 
(within  10  days)  by  the  consignee  with  the  freight  carrier  and  all  cartons  and 
merchandise  must  be  retained  for  inspection.    Internal  or  concealed  damage 
may  fall  under  Unified  Brands  responsibility  dependent  upon  the 
circumstances  surrounding  each  specific  incident  and  are  at  the  discretion  of 
the Unified Brands in-house service technician. 

 

 

Warranty Policies (cont.) 

Summary of Contents for 9215-32-7




























Reviews: