background image

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

Preparation Table 

Back Mount Saladtop 

models 9000-7 & 9412-32-7

Description:

Range from 27” to 60” long models, with a work surface height of 36”. 
The  models  9412-32-7  and  9412-32D-7  are  32.75”  deep,  while  the 
others  are  30”  deep.  Self-contained  refrigerated  salad  top  unit  with 
back-mounted  removable,  replaceable,  R-134a  refrigeration  system.  
“Front  Breathing”  system,  requiring  no  side  or  back  clearance.  Top 
openings  include  sanitary  raised  rims  and  recessed  adaptor  to  hold 
several 1/6 size pans. 

Specifications:

CABINET EXTERIOR: Constructed of all metal. The top, sides, and front 

are stainless steel. Cabinet top to be one piece die-formed 20 gauge 

stainless steel with 1 1/2” high square nosing. Top to have cutouts with 

raised  rims  and  recessed  adaptor  to  hold  6”  deep  pans.  Die-formed, 

removable  20  gauge  stainless  steel  roll  cover(s)  with  coved  interior 

corners and one piece integral handle provided. Bottom & back of unit 

are corrosion resistant steel. Full length NSF cutting board provided. Door 

openings to be ABS and to contain magnetic strip for positive sealing of 

gaskets. Model 9412-32D-7 comes with (2) refrigerated drawers, each 

opening  frame  to  be  stainless  steel  with  ABS  breaker  strips.  Drawer 

fronts to be 24 gauge stainless steel with 16 gauge stainless handle, 

magnetic gasket, ABS interior liner and foamed in place insulation. Units 

ship standard on (4) 6” legs, except for models 9412-32-7 & 9412-32D-

7 which ship standard on 2 1/2” high casters (front two with locks).

CABINET INTERIOR: Fully coved to meet N.S.F. standard #7. The 

Interior bottom, back, and top are anodized aluminum with coved 

corners for easy clean-up. The interior ends are ABS. Unit insulated 

with a minimum of 2.5” of CFC free, foamed in place polyurethane. 

(Model 9412-32D-7 with two refrigerated drawers below top. Each 

drawer contains two 12” x 20” x 6” deep polycarbonate pans- pans 

are removable without removing drawer tracks. Drawer tracks are 14 

gauge stainless steel with 1 5/16” stainless steel ball bearings, self-

closing and removable). 

DOORS: Stainless steel front with easy to grasp recessed handles, 

mounted on heavy duty concealed hinges. Hinges are all stainless steel 

with bronze pivot pin in nylon bushing, spring loaded to be self-closing. 

Door with foamed in place insulation, press fit magnetic gaskets - 

(designed for installation & removal without tools), and deep draw ABS 

interior liner for maximum insulation value. (Model 9412-32D-7, has 

refrigerated drawers in lieu of door).

REFRIGERATION: CFC free, R-134a back-mounted refrigeration 

system to be self-contained with evaporator blower coil, compressor, 

thermostatic control, forced-air condensing coil and capillary tube 

contained in removable assembly. Condensate evaporator provided. 

Units totally prewired and to be supplied with 8’ cordset(NEMA 5-15P) 

for 115 V operation. “Front Breathing” refrigeration system, requires no 

side or back clearance.

This equipment is intended for use in rooms having an ambient 

temperature of 86˚F (30˚C) or less.

Standard Features:

• Self-contained, removable, replaceable refrigeration 
   package that utilizes “CFC free” R-134a refrigerant
• Front Breathing / Down-Draft refrigeration system
• Removable stainless steel roll cover
• Fully adjustable shelves behind self-closing doors (model 
   9412-32D-7 has (2)drawers in leiu of doors)
• Full length NSF approved composition cutting board
• Stainless steel top, sides, and front
• Hot gas Condensate evaporator

Stainless steel back panel
Overshelves (double or single tier)
Export Voltages
Backsplash
Casters
Drawers in leiu of doors

Randell Preparation Table, Page 4

Revised 07/06

Options:

model 9412-32D-7
shown with non-standard cover 
and optional backsplash

model

   

9401-7 

9412-32-7 

9412-32D-7 

9801-7 

9303-7 

9304-7 

 

9305-7 

9601-7

33°F to 40°F

18°F to 22°F

33°F to 41°F

Reviews: