Randell FX-1-290, Operator'S Manual

OM-FX SERIES       11

Maintenance

Unified Brands strongly suggests a preventive maintenance program which would include 

the following 

Monthly

 procedures:

1.  Clean fan blades on the condensing unit and evaporator assembly.

2.  Clean all gaskets on a weekly if not daily basis with a solution of warm water and a 

mild detergent to extend gasket life.

3.  Lubricate door hinges with lithium grease. Modify for FX drawer slides and verify with 

engineering

RECOMMENDED CLEANERS FOR YOUR STAINLESS STEEL INCLUDE THE FOLLOWING:

JOB

CLEANING AGENT

COMMENTS

Routine cleaning

Soap, ammonia, 
detergent Medallion

Apply with a sponge or cloth

Fingerprints and smears

Arcal 20, Lac-O-Nu, Ecoshine

Provides a barrier film

Stubborn stains and 
discoloration

Cameo, Talc, Zud, 
First Impression

Rub in the direction of the 
polish lines

Greasy and fatty acids, blood, 
burnt-on foods

Easy-Off, Degrease It, 
Oven Aid

Excellent removal on all 
finishes

Grease and Oil

Any good commercial 
detergent

Apply with a sponge or cloth

Restoration/Preservation

Benefit, Super Sheen

Good idea monthly

Reference:  Nickel Development Institute, Diversey Lever, Savin, Ecolab, NAFEM

Proper maintenance of equipment is the ultimate necessity in preventing costly repairs.  By 

evaluating each unit on a regular schedule, you can often catch and repair minor problems 

before they completely disable the unit and become burdensome on your entire operation.

For more information on preventive maintenance, consult your local service 

company or CFESA member.  

Most repair companies offer this service at very reasonable 

rates to allow you the time you need to run your business along with the peace of mind 

that all your equipment will last throughout its expected life.  These services often offer 

guarantees as well as the flexibility in scheduling or maintenance for your convenience.

For a complete listing of current Unified Brands ASA please visit www.unifiedbrands.net.

Unified Brands believes strongly in the products it manufactures and backs those products 

with one of the best warranties in the industry.  We believe with the proper maintenance and 

use, you will realize a profitable return on your investment and years of satisfied service.

DO NOT USE SHARP UTENSILS AND/OR 
OBJECTS.

CAUTION
DO NOT USE ABRASIVE CLEANING 
SOLVENTS, AND NEVER USE HYDROCHLORIC 
ACID (MURIATIC ACID) ON STAINLESS STEEL.

DO NOT USE STEEL PADS, WIRE BRUSHES, 
SCRAPERS, OR CHLORIDE CLEANERS TO 
CLEAN YOUR STAINLESS STEEL.  

DO NOT PRESSURE WASH EQUIPMENT AS 
DAMAGE TO ELECTRICAL COMPONENTS 
MAY RESULT.