12
OM-FX SERIES
Troubleshooting
This unit is designed to operate smoothly and efficiently if properly maintained. However, the following is a list of checks to make in
the event of a problem. Wiring diagrams are found at the end of this manual.
SYMPTOM
POSSIBLE CAUSE
PROCEDURE
Unit does not run
No power to unit
Plug in unit
Control in OFF position
Turn controller on
Faulty control
Call for service at 888-994-7636
Unit too cold
Incorrect set point
Adjust control set point
Unit too warm
Door / drawer ajar
Ensure door / drawer is fully closed
Gasket torn or out of place
Inspect the gasket for wear and position
Incorrect set point
Adjust control set point
Warm product introduced to cabinet Pre-chill product 37
º
F or 3
º
F degree for freezer
Ice on the coil
Initiate manual defrost
Unit noisy
Ice on the coil
Initiate manual defrost
Unit does not defrost
Excessive ice on the coil
Initiate manual defrost
When in doubt, turn unit off and call for service and call for service at 888-944-7636.
Summary of Contents for FX-1A-290
Page 18: ...18 OM FX SERIES Electrical Schematic...
Page 20: ...20 OM FX SERIES EXTERIOR OF UNIT NEAR EXPOSED REFRIGERANT TUBING Labeling...
Page 22: ......
Page 23: ......
