LP0245
R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
9
Page | 9
NOTICE DE MONTAGE LP0245BK SUPPORT DE PLAQUE
KAWASAKI NINJA 400 2018 (POUR CLIGNOTANTS STANDARD ET MINI
CLIGNOTANTS R&G (8mm))
Le kit contient les articles exposés ci-dessous, vérifier que toutes les pièces soient
présentes avant de procéder au montage.
La façon dont le kit est emballé ne correspond pas forcément à la façon de monter les
pièces sur la moto.
LES PARTIES PRESENTEES PEUVENT ETRE UNIQUEMENT
REPRESENTATIVES (POUR LA CLARTE DES INSTRUCTIONS UNIQUEMENT
)
Notice disponible au téléchargement sur
VALEURS DE SERRAGE
•
M4 BOULON = 8 Nm
•
M5 BOULON = 12Nm
•
M6 BOULON = 15Nm
•
M8 BOULON = 20 Nm
M10 BOULON = 40Nm
Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir
les composants,
ces rondelles doivent être jetées
!
OUTILS REQUIS
•
Clés Allen 3, 4 et 5mm
•
Clé à c douilles 8, 12 et 13mm
•
Tournevis cruciforme.
•
Pinces électriques.
•
Un peu de superglue.