Reference Manual
Page 12
Reference Manual
Page 7
4.WARNING: Never connect the output to a power supply, battery or power main. Electrical shock may
result.
5.Tampering with the circuitry, or making unauthorized circuit changes may be hazardous and invalidates all
agency listings.
6.Do not operate the amplifier with the red Clip LEDs constantly flashing.
7.Do not overdrive the mixer, which will cause clipped signal to be sent to the amplifier. Such signals will be
reproduced with extreme accuracy, and loudspeaker damage may result.
8.Do not operate the amplifier with less than the rated load impedance. Due to the amplifier output protection,
such a configuration may result in premature clipping and speaker damage.
9. CAUTION - SHOCK HAZARD: Potentially lethal voltages exist at the output connectors when the amplifier is
turned on and is passing a signal.
Remember: We is not liable for damage that results from overdriving other system components.
3. Setup the Input EQ parameter
4. Setup input channel delay parameter
Fig 2.2
Fig 2.3
DPi Series
DPi Series
Summary of Contents for DPi Series
Page 1: ...USER S MANUAL...
Page 2: ......
