JHAIBLE.COM
J
H A
I B L E
6
VC Resonator - Patch Ideas
Basic Pinging - using the Resonator as a sound source
Letting the Resonator resonate on a Using both sides combined as one tracking oscillator .
•
Feed a click signal into the IN, e .g . a single spike (sawtooth form from a DSG) or a pulse (that will gener-
ate 2 clicks, one on each flank) .
•
Set the Frequency knob of each band to minimum (CCW) .
•
Set GAIN to about 50% and EMPH to maximum (or almost maximum) .
•
Use a Sequencer to control the CV inputs of each band, i .e . to step through different settings .
•
Listen to any output and play with GAIN and EMPH to explore .
•
Changing the input shape (rising edge) of the click slightly will have an effect, also dialing DRY in .
Abusive Pinging
Starting from the patch above, try swapping the input signals (click from DSG and sequencer outputs), like
•
Send the click into a CV in rather than the IN .
•
Try patching any output to any CV IN and play with the attenuator .
•
Use one of the CV signals from the sequencer as input (this will again just use the steps as a click) .
(Version 19 .04 .23)
HAIBLE is a registered trademark . All rights reserved .
