Instrument Tour
R&S
®
Spectrum Rider FPH
57
Getting Started 1321.0996.02 ─ 09
2. Select the coordinate format from the drop-down menu.
4.7.4
Configuring Date and Time
The R&S Spectrum Rider has an internal clock that can apply a date and time-
stamp. In the "Instrument Setup" dialog box, you can set both date and time.
Setting the date
1. In the "Instrument Setup" dialog box, select the "Set Date" item.
2. Enter the date you want with the numeric keys. The sequence depends on the
selected date format. See
3. Confirm the entry with the rotary knob.
Setting the time
1. In the "Instrument Setup" dialog box, select the "Set Time" item.
2. Enter the time you want with the numeric keys.
3. Confirm the entry with the rotary knob.
After you have entered the time, the R&S Spectrum Rider verifies the validity
of the time. If it is not a valid time, it sets to the next valid time.
Configuring the R&S Spectrum Rider
