Preparing for Use
R&S
®
Spectrum Rider FPH
13
Getting Started 1321.0996.02 ─ 09
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during
transportation and shipment can damage the instrument.
●
Always make sure that sufficient mechanical and electrostatic protection
is provided.
●
When shipping an instrument, the original packaging should be used. If
you do not have the original packaging, use sufficient padding to pre-
vent the instrument from moving around inside the box. Pack the instru-
ment in antistatic wrap to protect it from electrostatic charging.
●
Secure the instrument to prevent any movement and other mechanical
effects during transportation.
3.1.2
Accessory List
The instrument comes with the following accessories:
●
Power supply cable and adapter set
●
Li-ion rechargeable battery
●
USB2.0 cable A-Mini
●
Side strap
●
"Getting Started" printed manual
●
Document folder containing safety instructions, KC and CE certificate
Optional accessories and their order numbers are listed in the data sheet.
3.1.3
Setting up the R&S Spectrum Rider
The R&S Spectrum Rider is designed for lab operation as well as for service and
maintenance applications on-site.
Depending on the environment, you can adjust the viewing angle of the display
and either lay it out horizontally or prop it up using the support on the back of the
R&S Spectrum Rider.
Putting into Operation
