Instrument Tour
R&S
®
Spectrum Rider FPH
56
Getting Started 1321.0996.02 ─ 09
Displaying GPS information
1. In the "Instrument Setup" dialog box, select the "Show GPS Information" item.
A drop-down menu opens to turn the display of the GPS information on and
off.
2. Turn the display of GPS information on or off as required.
When the "Show GPS Information" item is set on, the R&S Spectrum Rider dis-
plays the GPS coordinates and number of satellites in the
when sufficient connection is established to the GPS satellites.
When the satellite connection is lost, the GPS coordinates and number of satel-
lites are displayed with a white bar.
When the GPS receiver is not connected or enabled, a message "GPS Not Con-
nected" is displayed in the
The state of the satellite lock shown in the title bar is illustrated as follows.
●
indicates that the GPS receiver is enabled and that there is a fix connec-
tion with enough satellites for the GPS receiver to provide the coordinates.
●
indicates that the GPS receiver is enabled but that there is no fix connec-
tion to a satellite.
●
indicates that the GPS receiver is enabled but that there is no GPS
receiver connection.
●
The title bar shows no symbol if the GPS receiver is not enabled
Selecting the coordinate format
1. In the "Instrument Setup" dialog box, select the "Coordinate Format" item.
A drop-down menu opens to select the coordinate format.
Configuring the R&S Spectrum Rider
