Instrument Tour
R&S
®
Spectrum Rider FPH
72
Getting Started 1321.0996.02 ─ 09
4. Specify a name for the new network connection, e.g. R&S Spectrum Rider.
5. Enter the IP address for the R&S Spectrum Rider (in this case 192.168.1.20).
6. Confirm the entry with the "Save" button.
The connection is now created and configured.
7. Select the new connection labeled R&S Spectrum Rider.
8. Select the "Connect" button to establish the connection.
Connecting the R&S Spectrum Rider in an existing LAN
You can either get the R&S Spectrum Rider IP address automatically from the
DHCP server or manually assign a fixed address.
With manual allocation, a fixed IP address and subnet mask must be assigned to
the R&S Spectrum Rider as described in
Chapter 4.8.1, "LAN Connection"
on page 69. After setting up the R&S Spectrum Rider, configure the R&S Instru-
mentView software with the assigned IP address as described in
R&S InstrumentView software package"
Free IP address
Contact your IT system administrator to get a free IP address.
In networks with a DHCP server, the DHCP permits automatic allocation of the
network configuration to the R&S Spectrum Rider connected via LAN cable. For
this purpose, the DHCP has to be active on the R&S Spectrum Rider.
Connecting the R&S Spectrum Rider to a PC
