Instrument tour
R&S
®
TSMA6B
14
User Manual 4901.4026.02 ─ 01
USB 2.0 (1x)
The USB 2.0 can be used for connecting external devices, e.g. keyboard, mouse or
software dongle.
Power limit: max. 500 mA / port
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
USB-C
The USB-C port (multiport for Thunderbolt, display and standard USB-C 3.1) can be
used for connecting external storage devices, tablets and test mobile phones.
Total power (USB-C): max. 3 A
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
DC IN connector
The DC IN connector is used to supply the R&S TSMA6B with DC power. A wide DC
input range 11
V to 18
V / max. 7
A is supported.
Docking connector R&S TSMA6B-BP
Restore
Press the RESTORE button ( > 20 sec) to bring the system partition of the embedded
Windows CPU back to factory default or to a user backup (if created).
Status LEDs - Mode, Meas
The status LEDs [Mode] and [Meas] indicate different states of the R&S TSMA6B. For
a detailed description, see
Power ON/OFF
The POWER ON/OFF button turns on and off the device.
Press and hold the button results in a coldstart of the R&S TSMA6B.
HDMI connector (2x)
The HDMI connectors can be used for connecting an external monitor (max. resolution:
2560 x 1600 pixel).
Status LEDs - Scanner Pwr / State
The status LEDs, [Scanner State] and [Scanner Pwr] indicate different states of the
R&S TSMA6B. For a detailed description, see
GPS Ant.
An SMA connector is provided for the supplied external active GPS antenna (Antenna
power: 3
V, max. 25
mA).
Rear panel view
