Troubleshooting
R&S
®
TSMA6B
107
User Manual 4901.4026.02 ─ 01
Figure 9-4: RF antenna connector
1 = RF port
2. Check if the GPS antenna is connected to GPS antenna input.
Figure 9-5: GPS antenna connector
1 = GPS antenna connector
Note:
Only use the GPS antenna included in the scope of delivery.
3. Check if the LEDs indicate an error (see
Chapter 9.1, "LED indicated errors"
4. Open the web GUI (Internet Explorer, URL:
http://localhost
) and change the "Mode
of Operation" to "PC Mode".
5. Start the "TSME Device Manager" via the Windows "Start" menu.
"Start > All Programs > TsmeTools > TsmeDeviceManager"
Check if there are any error messages in the "TSME Device Manager".
● If errors are reported in the "Device Analysis Output" window, follow the instruc-
tions.
● If no errors are reported or if the repair actions via the "Device Analysis Output"
window fail, contact the R&S support.
No RF / GPS data
