Instrument tour
R&S
®
EDS300
26
Getting Started 1179.5630.02 ─ 01
Table 5-3: Specification of low-power interrogator, option R&S
EDS-B2
Output power:
max. 1 W (+30 dBm) ±1.5 dB
Frequency
range:
960 MHz ... 1215 MHz
Channel offset:
1 MHz
Distance range:
5.4 NM (approx. 10 km)
Resolution:
0.1
m
Deviation:
≤
5 m
Connector:
N-socket, 50
Ω
5.1.4.2
USB interface
The front panel provides two female USB connectors (USB-A) to connect devices
like a memory stick to store and reload instrument settings and measurement
data. Only USB sticks using the FAT / FAT32 file system are supported.
The connectors are standard USB 2.0 ports with a maximum transmission rate of
approximately 30
Mbit/s.
The rear panel provides further USB connectors (standard 3.0), see
5.1.4.3
Headphone output AF OUT
Audio output is available by connecting a headphone to the 3.5
mm jack plug "AF
OUT".
Note the safety information provided in
For details, see the user manual.
5.1.4.4
Voltage supply for external consumers: 12 VDC OUT
The R&S
EDS300 provides a power supply for connected external devices at the
3-pole circular "12 VDC OUT" connector. The output for external consumers such
as an active receiving antenna is supplied permanently with 12 VDC / 300 mA.
Front panel view
