Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1049
User Manual 1178.8520.02 ─ 01
<li>
Parameters:
<Threshold>
Numeric value.
The unit depends on
on page 1049.
*RST:
-200 dBm
Default unit: DBM
Manual operation:
See
CALCulate<n>:LIMit<li>:NAME
<Name>
This command selects a limit line that already exists or defines a name for a new limit
line.
Suffix:
<n>
.
<li>
Parameters:
<Name>
String containing the limit line name.
*RST:
REM1 to REM8 for lines 1 to 8
Manual operation:
See
CALCulate<n>:LIMit<li>:UNIT
<Unit>
This command defines the unit of a limit line.
Suffix:
<n>
.
irrelevant
<li>
Parameters:
<Unit>
DBM | DBPW | WATT | DBUV | DBMV | VOLT | DBUA |
AMPere | DB | DBUV_M | DBUA_M | (unitless)
If you select dB as the limit line unit, the command automatically
turns the limit line into a relative limit line.
*RST:
DBM
Manual operation:
See
CALCulate<n>:LIMit<li>:UPPer[:DATA]
<LimitLinePoints>
This command defines the vertical definition points of an upper limit line.
Suffix:
<n>
.
irrelevant
<li>
Analyzing Measurements (Basics)
