Applications, Measurement Channels
R&S
®
FSVA3000/ R&S
®
FSV3000
109
User Manual 1178.8520.02 ─ 01
6
Applications, Measurement Channels
The R&S
FSV/A allows you to perform all sorts of different analysis tasks on different
types of signals, e.g. W-CDMA, I/Q analysis or basic spectrum analysis. Depending on
the task or type of signal, a different set of measurement functions and parameters are
required. Therefore, the R&S
FSV/A provides various applications - some of which are
included in the base unit, others are optional. The default application when you start
the R&S
FSV/A is "Spectrum", for basic spectrum analysis measurements on any type
of signal.
For each application, a separate measurement channel is created, which determines
the measurement settings for that application. The same application can be activated
with different measurement settings by creating several channels for the same applica-
tion. Each channel is displayed in a separate tab on the screen.
The maximum number of measurement channels may be limited by the available
memory on the instrument.
6.1
Available Applications
Access
: [MODE]
Spectrogram application
Spectrogram measurements are not a separate application, but rather a trace evalua-
tion method, thus they are available as an evaluation method for the Display Configu-
ration, not by creating a new channel. Spectrograms are configured and activated in
the "Trace" settings. See
Chapter 9.5.2.1, "Working with Spectrograms"
for details.
...................................................................................... 112
Available Applications
