Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
129
User Manual 1178.8520.02 ─ 01
Figure 7-1: Sine wave signal with low S/N ratio
5. To suppress noise spikes, average the trace. In the "Traces" configuration dialog,
set the "Trace Mode" to "Average" (see
The traces of consecutive sweeps are averaged. To perform averaging, the
R&S
FSV/A automatically switches on the sample detector. The RF signal, there-
fore, can be more clearly distinguished from noise.
Figure 7-2: RF sine wave signal with low S/N ratio with an averaged trace
Basic Measurements