Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
237
User Manual 1178.8520.02 ─ 01
List Evaluation State (Result Summary)
..................................................................... 237
Saving the Result Summary (Evaluation List) to a File
.............................................. 237
List Evaluation State (Result Summary)
Activates or deactivates the Result Summary.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:AUTO
Show Peaks
If activated, all peaks that have been detected during an active SEM measurement are
marked with blue squares in the Spectrum diagram.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:PSHow
Margin
Although a margin functionality is not available for the limit check, you can define a
margin (or:
threshold
) for the peak values to be displayed in the result summary. Only
peaks that exceed the margin value are displayed (also in the diagram, if activated).
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:MARGin
Saving the Result Summary (Evaluation List) to a File
Exports the Result Summary of the SEM measurement to an ASCII file for evaluation
in an external application. If necessary, change the decimal separator for evaluation in
other languages.
Define the filename and storage location in the file selection dialog box that is dis-
played when you select the "Save" function.
For details, see
Chapter 7.6.8.2, "ASCII File Export Format (Spectrum Emission
Remote command:
7.6.6
How to Perform a Spectrum Emission Mask Measurement
SEM measurements can be performed according to a specific standard or freely con-
figured. Configuration for signals with a regular channel definition can be configured
quickly and easily. Selecting the SEM measurement is a prerequisite for all other tasks.
For signals with multiple carriers, also in non-contiguous ranges, an SEM measure-
ment with multiple sub blocks can be configured.
For multi-standard radio SEM measurements, configuration for specified scenarios can
be done automatically.
Spectrum Emission Mask (SEM) Measurement
