General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
581
User Manual 1178.8520.02 ─ 01
Some general conditions apply to event-based actions:
●
Rules are defined globally. However, you must activate each rule for each applica-
tion individually.
●
Only the currently active measurement channel processes rules.
●
The R&S
FSV/A in general, or any applications, do not perform a validity check on
the rules.
●
When you save and then recall the instrument settings, any rule definitions are also
stored and loaded, including their state.
●
After an instrument preset or restart, the rules are maintained, but disabled. The
trigger count for rules is cleared.
Debugging Rules with the EBA-Journal
................................................................588
Reference: Overview of Available Result-Events
..................................................589
12.3.1
Managing Rules
Access
: toolbar
The event-based actions manager allows you to configure actions to be performed
when specific events occur in the measurement.
Event-based Actions
