General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
609
User Manual 1178.8520.02 ─ 01
Only
.dfl
files can be loaded. The default storage directory for correction files is
C:\R_S\INSTR\USER\FResponse
.
Remote command:
[SENSe:]CORRection:FRESponse:USER:LOAD
Save Settings
Stores a saveset for a user-defined frequency response correction scenario. As for all
instrument settings, a
.dfl
file is created for the correction data. Note that only the
settings defined in this dialog box are stored, not the contents of the files themselves.
Whether the settings for the currently selected channel only or for all channels are
stored depends on the
The default storage directory is
C:\R_S\INSTR\USER\FResponse
.
Remote command:
[SENSe:]CORRection:FRESponse:USER:STORe
Clear Settings
Clears all current user-defined frequency response correction settings, either for the
currently selected channel only or for all channels, depending on the
setting.
Merely files specific to the R&S
FSV/A itself remain in the list of Touchstone files.
Remote command:
[SENSe:]CORRection:FRESponse:USER:PRESet
Touchstone File Information
Provides information on loaded Touchstone files and the order of their application.
If an external preamplifier is active, it is also incldued at the bottom of the list.
ID ← Touchstone File Information
Consecutive number which determines the order in which the correction files are
applied to the measurement data. The maximum number of files per configuration is
15.
An LED-like symbol indicates whether the file is active and Touchstone files or the
external preamplifier in general are switched on (symbol "lights up") or not (symbol is
dark). A purple symbol represents a Touchstone file.
Filename ← Touchstone File Information
Name of a loaded Touchstone file.
Active ← Touchstone File Information
Activates or deactivates the selected file for the current configuration. Only active files
are included in filter calculation.
Remote command:
[SENSe:]CORRection:FRESponse:USER:SLISt<sli>:STATe
To - From ← Touchstone File Information
Touchstone files can be defined for a varying number of input and output ports.
You must define the ports from the Touchstone file whose data is to be applied.
Frequency Response Correction (R&S
FSV/A-K544)
