General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
633
User Manual 1178.8520.02 ─ 01
When you couple a parameter across all active measurement channels, a change in
the currently selected application is passed on to all other active measurement chan-
nels.
Synchronizing parameters across all measurement channels
....................................633
Selecting all or no coupling mechanisms
.................................................................... 633
Restoring the default configuration
............................................................................. 633
Synchronizing parameters across all measurement channels
To synchronize a specific parameter, turn on the corresponding function.
Note that you cannot synchronize all parameters at the same time, because some
parameters are interdependent. For example, you cannot synchronize the resolution
and video bandwidth simultaneously, because the video bandwidth depends on the
resolution bandwidth and vice versa.
Selecting all or no coupling mechanisms
Select all items available in the general coupling manager using the "Enable All Items"
button.
Note that you cannot actually select all items, because some of them are mutually
exclusive.
Deselect all items available in the coupling manager using the "Disable All Items" but-
ton.
Remote command:
not supported
Restoring the default configuration
You can restore the default parameter coupling configuration any time with the "Default
Config" button.
Remote command:
not supported
Synchronizing Measurement Channel Configuration
