Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
809
User Manual 1178.8520.02 ─ 01
[SENSe:]ESPectrum<sb>:FILTer[:RRC]:ALPHa
<Alpha>
This command defines the roll-off factor for the RRC filter.
The RRC filter is available if the power reference is the channel power.
Suffix:
<sb>
.
1..n
Sub block in a Multi-SEM measurement
Parameters:
<Alpha>
Range:
0 to 1
*RST:
0.22
Manual operation:
See
[SENSe:]ESPectrum<sb>:FILTer[:RRC][:STATe]
<State>
This command turns the RRC filter in the reference range on and off.
The RRC filter is available if the power reference is the channel power.
Suffix:
<sb>
.
1..n
Sub block in a Multi-SEM measurement
Parameters:
<State>
ON | OFF | 0 | 1
*RST:
1
Manual operation:
See
[SENSe:]ESPectrum<sb>:RRANge?
This command queries the reference range.
Suffix:
<sb>
.
Sub block in a Multi-SEM measurement
Return values:
<RefRange>
Number of the current reference range.
Range:
1 to 30
Usage:
Query only
[SENSe:]ESPectrum<sb>:RTYPe
<Type>
This command defines the type of the power reference.
Suffix:
<sb>
.
1..n
Sub block in a Multi-SEM measurement
Parameters:
<Type>
PEAK | CPOWer
Configuring and Performing Measurements
