Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
841
User Manual 1178.8520.02 ─ 01
[SENSe:]SWEep:EGATe:TRACe<t>:STARt<gr>
<Time>
This command defines the start time for a gate range.
Suffix:
<t>
.
<gr>
1..n
gate range
Parameters:
<Time>
The value range depends on the gate period you have set for
the selected trace with
•
the start time may not be higher than the length of the gate
•
the start time may not be lower than the stop time of the gate
range of a lower order
The reset values depend on the gate range.
•
for gate range 1, the start time is 0
ms
•
for gate range 3, the start time is 2
ms
•
for gate range 5, the start time is 4
ms
Default unit: s
Example:
SWE:EGAT:TRAC1:STAR1 3ms
Sets the Starting point for range 1 on trace 1 at 3 ms.
Manual operation:
See
[SENSe:]SWEep:EGATe:TRACe<t>[:STATe<gr>]
<State>
This command includes or excludes a gate range for a particular trace.
Suffix:
<t>
.
<gr>
gate range
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
SWE:EGAT:TRAC1:STAT1 ON
Activates gate range 1 for trace 1.
Manual operation:
See
See
[SENSe:]SWEep:EGATe:TRACe<t>:STOP<gr>
<Time>
This command defines the stop time for a gate range.
Configuring and Performing Measurements
