Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
869
User Manual 1178.8520.02 ─ 01
Parameters:
<PeakPower>
ON | OFF | 0 | 1
Turns peak power evaluation on and off.
*RST:
1
<RMSPower>
ON | OFF | 0 | 1
Turns RMS power evaluation on and off.
*RST:
0
<AVGPower>
ON | OFF | 0 | 1
Turns average power evaluation on and off.
*RST:
0
<TriggerSource>
IMMediate | LINE | EXTernal | VIDeo | RFPower | IFPower |
RFPower | EXT2 | EXT3 | EXT4 | LXI
Selects a trigger source.
<TriggerSlope>
POSitive | NEGative
Selects the trigger slop.
<TriggerOffset>
Defines the trigger delay.
Range:
negative measurement time to 30 s
*RST:
0
Default unit: s
<GateLength>
Defines the gate length for gated measurements.
Setting 0 seconds turns gated measurements off.
To perform gated measurements, the trigger source must be dif-
ferent from
IMMediate
.
Range:
31.25 ns to 30 s
*RST:
0 s
Default unit: s
[SENSe:]LIST:POWer:STATe
<State>
This command turns the List Evaluation off.
Parameters:
<State>
OFF | 0
*RST:
0
14.5.13.2
Example: Performing List Evaluation
The following example shows a list evaluation with the following configuration.
Configuring and Performing Measurements
