Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
927
User Manual 1178.8520.02 ─ 01
If the probe is disconnected, the DM-mode offset of the probe is reset to 0.0
V.
Note that if the offset for DM-mode or CM-mode is changed, the offsets for the P-mode
and N-mode are adapted accordingly, and vice versa.
For details see the R&S
FSV/A I/Q Analyzer and I/Q Input User Manual.
Suffix:
<pb>
.
1..n
Selects the connector:
3 = RF
Parameters:
<DMOffset>
Voltage offset between the positive and negative input terminal
Default unit: V
Manual operation:
See
"Common Mode Offset / Diff. Mode Offset / P Offset / N Off-
[SENSe:]PROBe<pb>:SETup:MODE
<Mode>
Suffix:
<pb>
.
1..n
Selects the connector:
3 = RF
Parameters:
<Mode>
RSINgle | NOACtion
RSINgle
Run single: starts one data acquisition.
NOACtion
Nothing is started on pressing the micro button.
Manual operation:
See
[SENSe:]PROBe<pb>:SETup:NAME?
Queries the name of the probe.
Suffix:
<pb>
.
1..n
Selects the connector:
3 = RF
Return values:
<Name>
String containing the name of the probe.
Example:
//Query name of the probe
PROB3:SET:NAME?
Usage:
Query only
Manual operation:
See
Setting Basic Measurement Parameters
