R&S FSVA3000 Series, Security Procedures

Instrument Declassification

R&S

®

FSVA3000 / R&S

®

FSV3000

8

Instrument Security Procedures 1179.0097.02 ─ 01

–

If R&S

FSV3-K33 is 

available

 with 

Secure User Mode

enabled

:

The R&S

FSV/A redirects user data and instrument setups to the volatile mem-

ory (SDRAM).

Sanitization procedure:

 Turn of instrument power.

●

If the CFAST memory card is 

not inserted

:

Without the CFAST memory card, holding the operating system etc., you cannot
work with the R&S

FSV/A.

Sanitization procedure:

 None required.

See also 

Chapter 5, "Instrument Declassification"

, 

on page 8.

5

Instrument Declassification

Before you can remove the R&S

FSV/A from a secured area (for example to perform

service or calibration), all classified user data needs to be removed.

Overview for declassification of the R&S

FSV/A depending on the configuration

The options R&S

FSV3-B20 (removable hard drive) and R&S

FSV3-K33 (security write

protection of solid state drive) determine the sanitization procedures for the
R&S

FSV/A as shown in 

Figure 5-1

.

Refer also to 

Types of Memory and Information Storage in the R&S

FSV/A

, 

Secure

User Mode

, and chapter 

Protecting Data Using the Secure User Mode

 in the user man-

ual of the R&S

FSV/A, see 

www.rohde-schwarz.com/manual/fsv3000/

.

Figure 5-1

 illustrates the different ways of data storage and sanitization procedures,

depending on the options the instrument is equipped with.