Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
22
Getting Started 1330.8073.02 ─ 04
Provided the network administrator has assigned you the appropriate rights and
adapted the Windows firewall configuration, you can use the interface, for exam-
ple:
●
To transfer data between a controlling device and the test device, e.g. to run a
remote control program
●
To access or control the measurement from a remote computer using the
"Remote Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
►
NOTICE!
Risk of network failure.
Consult your network administrator before performing the following tasks:
● Connecting the instrument to the network
● Configuring the network
● Changing IP addresses
● Exchanging hardware
Errors can affect the entire network.
Connect the R&S
FSV/A to the LAN via the LAN interface on the rear panel of
the instrument.
Windows automatically detects the network connection and activates the
required drivers.
By default, the R&S
FSV/A is configured to use DHCP and no static IP
address is configured.
The default instrument name is <Type><variant>-<serial_number>, for
example, FSV3004-123456. For information on determining the serial num-
ber, see
For more information on LAN configuration, see the R&S
FSV/A user manual.
4.8
Connecting a Keyboard
The keyboard is detected automatically when it is connected. The default input
language is English – US.
Connecting a Keyboard
