Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
28
Getting Started 1330.8073.02 ─ 04
Some administrative tasks require administrator rights (e.g. the configuration of a
LAN network). Refer to the description of the basic instrument Setup ([Setup]
menu) to find out which functions are affected.
Secure user mode
If the secure user mode option (R&S
FSV3-K33) is installed, an additional
account is provided: the
"SecureUser"
.
The "SecureUser" is a standard user account with limited functionality. In
particular, administrative tasks such as LAN configuration or general instru-
ment settings are not available. Furthermore, for a "SecureUser", data that
the R&S
FSV/A normally stores on the solid-state drive is redirected to vola-
tile memory instead. You can access data that is stored in volatile memory
during the current instrument session. However, when the instrument’s
power is removed, all data in volatile memory is erased.
For details, see
Chapter 4.15, "Protecting Data Using the Secure User
Passwords
For all default user accounts, the initial password is
894129
. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login. An administrator can change the password in Windows
10
for any user at any time via "Start > Settings > Account > SignIn Options > Pass-
word > Change".
Auto-login
When shipped, the instrument automatically logs on the default "Instrument" user
to Windows
10 using the default password. This function is active until an admin-
istrator explicitly deactivates it or changes the password.
Changing the password and use of auto-login function
Note that when you change the default password, the default auto-login
function no longer works!
In this case, you must enter the new password manually to log on.
Logging On
