Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
85
Getting Started 1330.8073.02 ─ 04
Sa
SAMPLE detector
Av
AVERAGE detector
Rm
RMS detector
QP
QUASIPEAK detector
(4)
Trace Mode
Sweep mode:
Clrw
CLEAR/WRITE
Max
MAX HOLD
Min
MIN HOLD
Avg
AVERAGE (Lin/Log/Pwr)
View
VIEW
(5)
Smoothing factor
Smth
Smoothing factor, if enabled.
Norm/NCor
Correction data is not used.
7.1.3
Marker Information
Marker information is provided either in the diagram grid or in a separate marker
table, depending on the configuration.
Marker information in diagram grid
Within the diagram grid, the x-axis and y-axis positions of the last two markers or
delta markers that were set are displayed, if available, as well as their index. The
value in the square brackets after the index indicates the trace to which the
marker is assigned. (Example: M2[1] defines marker 2 on trace 1.) For more than
two markers, a separate marker table is displayed beneath the diagram by
default.
Marker information in marker table
In addition to the marker information displayed within the diagram grid, a separate
marker table may be displayed beneath the diagram. This table provides the fol-
lowing information for all active markers:
Type
Marker type: N (normal), D (delta), T (temporary, internal), PWR
(power sensor)
Ref
Reference (for delta markers)
Understanding the Display Information