Operating the Instrument
R&S
®
FSVA3000/R&S
®
FSV3000
96
Getting Started 1330.8073.02 ─ 04
1. In the input field for a numeric value, select the pencil icon to switch to exten-
ded data entry mode.
2. Use the left and right arrow keys to scroll through the individual digits of the
indicated value.
3. Change the required digit using the up and down arrow keys or the rotary
knob to scroll through the values 0 to 9.
The new value is applied immediately, without further confirmation.
Note:
● If you enter a digit using the keypad, the entire value is overwritten, as in
normal data entry mode.
● To add a digit to the existing value, you must return to normal data entry
mode. Select the pencil icon to toggle between entry modes.
4. To change the unit:
a) Press the right arrow key and scroll past the last digit to select the unit list.
b) Use the up and down arrow keys to scroll through the available units.
c) Press the left arrow key to return to the last digit of the numeric value.
The new unit is applied immediately, without further confirmation.
5. Select the "X" to close the input field.
7.3.2
Entering Alphanumeric Parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to
enter numbers and (special) characters (see
Chapter 7.2.4, "On-screen Key-
Alternatively, you can use the keypad. Every alphanumeric key represents sev-
eral characters and one number. The decimal point key (.) represents special
characters, and the sign key (-) toggles between capital and small letters. For the
assignment, refer to
Entering Data
