Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1044
User Manual 1178.8520.02 ─ 01
CALCulate<n>:LIMit<li>:CONTrol[:DATA]
<LimitLinePoints>
This command defines the horizontal definition points of a limit line.
Suffix:
<n>
.
irrelevant
<li>
Parameters:
<LimitLinePoints>
Variable number of x-axis values.
Note that the number of horizontal values has to be the same as
the number of vertical values set with
FSV/A either adds missing val-
ues or ignores surplus values.
The unit is Hz or s.
*RST:
-
Default unit: HZ
Manual operation:
See
CALCulate<n>:LIMit<li>:CONTrol:DOMain
<SpanSetting>
This command selects the domain of the limit line.
Suffix:
<n>
.
irrelevant
<li>
Parameters:
<SpanSetting>
FREQuency | TIME
FREQuency
For limit lines that apply to a range of frequencies.
TIME
For limit lines that apply to a period of time.
*RST:
FREQuency
Example:
CALC:LIM:CONT:DOM FREQ
Select a limit line in the frequency domain.
Manual operation:
See
CALCulate<n>:LIMit<li>:CONTrol:MODE
<Mode>
This command selects the horizontal limit line scaling.
Suffix:
<n>
.
irrelevant
Analyzing Measurements (Basics)
