Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1131
User Manual 1178.8520.02 ─ 01
SYSTem:DFPRint?
Creates an
*.xml
file with information on installed hardware, software, image and
FPGA versions. The
*.xml
file is stored under
C:\R_S\INSTR\\devicedata\xml\DeviceFootprint_*
on the instrument. It is
also output to the remote interface as binary data.
Return values:
<InfoFile>
Contents of the xml file in binary format.
Example:
SYST:DFPR?
Usage:
Query only
Manual operation:
See
SYSTem:ERRor:CLEar:REMote
This command deletes all contents of the "Remote Errors" table.
Note: The remote error list is automatically cleared when the R&S
FSV/A is shut down.
Example:
SYST:ERR:CLE:REM
Manual operation:
See
See
SYSTem:ERRor:EXTended?
<MessageType>[, <ChannelName>]
This command queries all system messages, or all messages of a defined type, dis-
played in the status bar for a specific channel (application).
Note:
This command queries the strings displayed for manual operation. For remote
programs, do not define processing steps depending on these results. Instead, query
the results of the
STATus:QUEStionable:EXTended:INFO
status register, which
indicates whether messages of a certain type have occurred (see
Parameters:
<MessageType>
ALL | INFO | WARNing | FATal | ERRor | MESSage
<ChannelName>
String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Return values:
<Messages>
String containing all messages of the selected type for the speci-
fied channel. Each message is separated by a comma and
inserted in parentheses. If no messages are available, empty
parentheses are returned.
Example:
SYST:ERR:EXT? ALL
Returns all messages for the currently active application, e.g.
"Message 1","Message 2"
.
Configuring the R&S
FSV/A
