Getting Started
R&S
®
FSVA3000/ R&S
®
FSV3000
23
User Manual 1178.8520.02 ─ 01
5
Getting Started
Note
: the following chapters are identical to those in the printed R&S
FSV/A Getting
Started manual.
....................................................................................... 57
........................................................................................ 76
5.1
Preparing for Use
............................................................................................. 23
....................................................................................29
........................................................................................33
Connecting an External Monitor
..............................................................................35
Setting Up a Network (LAN) Connection
.................................................................36
Configuring the Initial Instrument Settings
.............................................................. 41
Protecting Data Using the Secure User Mode
........................................................ 42
5.1.1
Putting into Operation
This section describes the basic steps to be taken when setting up the R&S
FSV/A for
the first time.
Risk of injury due to disregarding safety information
Observe the information on appropriate operating conditions provided in the data sheet
to prevent personal injury or damage to the instrument. Read and observe the basic
safety instructions provided with the instrument, in addition to the safety instructions in
the following sections. In particular:
●
Do not open the instrument casing.
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measurements and to
avoid damage to the instrument. Observe the information on appropriate operating
conditions provided in the basic safety instructions and the instrument's data sheet.
Preparing for Use