Getting Started
R&S
®
FSVA3000/ R&S
®
FSV3000
31
User Manual 1178.8520.02 ─ 01
●
"Administrator"
: an administrator account with unrestricted access to the com-
puter/domain
Some administrative tasks require administrator rights (e.g. the configuration of a LAN
network). Refer to the description of the basic instrument setup ([SETUP] menu) to find
out which functions are affected.
Secure user mode
If the secure user mode option (R&S
FSV/A-K33) is installed, an additional account is
provided: the
"SecureUser"
.
The "SecureUser" is a standard user account with limited functionality. In particular,
administrative tasks such as LAN configuration or general instrument settings are not
available. Furthermore, for a "SecureUser", data that the R&S
FSV/A normally stores
on the solid-state drive is redirected to volatile memory instead. You can access data
that is stored in volatile memory during the current instrument session. However, when
the instrument’s power is removed, all data in volatile memory is erased.
For details, see
Chapter 5.1.7, "Protecting Data Using the Secure User Mode"
Automatic login
For the standard instrument account, an automatic login function is active by default. If
activated, login is carried out automatically in the background when the R&S
FSV/A is
started, without having to enter a password. This function is active until an administra-
tor explicitly deactivates it or changes the password.
For information on how to deactivate or reactivate the automatic login, refer to
Passwords
For all default user accounts, the initial password is
894129
. Note that this password is
very weak, and it is recommended that you change the password for both users after
initial login. An administrator can change the password in Windows
10 for any user at
any time via "Start > Settings > Account > SignIn Options > Password > Change".
Changing the password and use of auto-login function
Note that when you change the default passwords, the default auto-login function no
longer works! Reactivate it manually as described in
"Reactivating the automatic login
Automatic Login Function
When shipped, the instrument automatically logs on the default "Instrument" user to
Windows
10 using the default password.
Preparing for Use
