Data Management
R&S
®
FSVA3000/ R&S
®
FSV3000
539
User Manual 1178.8520.02 ─ 01
Selecting Storage Location - Drive/ Path/ Files
...........................................................539
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the selected file are loaded each time the instrument is started or preset. If deactivated,
the default settings are loaded.
Note that only
instrument
settings files can be selected for the startup recall function,
not "Channel" files.
Remote command:
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_std
.
Note:
Saving instrument settings in secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see
Chapter 5.1.7, "Protecting Data Using the Secure User Mode"
Remote command:
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see
Chapter 11.3.2.2, "Storage Location and
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
Storing and Recalling Instrument Settings and Measurement Data
