General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
589
User Manual 1178.8520.02 ─ 01
Debug / Info / Warning / Error
Determines which level of information is provided in the journal, depending on its
importance. Each level displays information of the selected level or higher. The type of
information is indicated in the log display.
"DBG"
Additional descriptions as debugging information (only if
is enabled).
"INF"
Basic information on triggering events or executed actions defined by
the active rules
"WNG"
Information on possibly unexpected results due to conflicting rule def-
initions, for example if an "Auto Level" action causes the EBA man-
ager to pause execution of further actions
"ERR"
Errors concerning failed rules, for example due to missing action
command or invalid trigger event
Refresh
Updates the journal display to include the latest information (since journal was opened
or last updated).
Clear
Clears all currently stored information in the journal
Debug Logging
If enabled, additional debug information is logged in the journal. Since this information
requires large amounts of storage space and can slow down the performance of the
firmware, use this mode carefully and only when necessary for troubleshooting. Debug
mode is automatically disabled when you close the EBA Journal dialog.
12.3.4
Reference: Overview of Available Result-Events
Using the event-based actions function, you can define actions to be performed
depending on the values of specific results (see
and
on page 585). The following overview shows you which results are available for which
measurements.
Measurement
Result
Limit check
Channel power ACLR
Channel Power ACLR Tx Total
Channel Power ACLR
Channel Power ACLR Tx<1-n>
Channel Power ACLR Adj Lower
Channel Power ACLR Adj Upper
Channel Power ACLR Alt<1-n> Lower
Channel Power ACLR Alt<1-n> Upper
Carrier-to-Noise
C/N
C/N
0
Event-based Actions