Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
955
User Manual 1178.8520.02 ─ 01
Example:
SYST:SPE:MUTE
Manual operation:
See
SYSTem:SPEaker:VOLume
<Volume>
This command defines the volume of the built-in loudspeaker for demodulated signals.
This setting is maintained for all applications.
The command is available in the time domain in Spectrum mode and in Analog
Demodulation mode.
Parameters:
<Volume>
Percentage of the maximum possible volume.
Range:
0 to 1
*RST:
0.5
Example:
SYST:SPE:VOL 0
Switches the loudspeaker to mute.
Manual operation:
See
14.8
Analyzing Measurements (Basics)
The commands for general analysis tasks are described here.
.......................................................................................955
Configuring the Trace Display and Retrieving Trace Data
.................................... 959
............................................................................................982
Configuring Display and Limit Lines
....................................................................1040
14.8.1
Zooming into the Display
14.8.1.1
Using the Single Zoom
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:AREA
.................................................... 955
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM[:STATe]
..................................................956
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:AREA
<x1>,<y1>,<x2>,<y2>
This command defines the zoom area.
To define a zoom area, you first have to turn the zoom on.
Analyzing Measurements (Basics)