Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
972
User Manual 1178.8520.02 ─ 01
Example:
DISP:WIND:SGR:COL:UPP 95
Sets the start of the color map to 95%.
Manual operation:
See
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]
<ColorScheme>
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]
<ColorScheme>
This command selects the color scheme.
Parameters:
<ColorScheme>
HOT
Uses a color range from blue to red. Blue colors indicate low lev-
els, red colors indicate high ones.
COLD
Uses a color range from red to blue. Red colors indicate low lev-
els, blue colors indicate high ones.
RADar
Uses a color range from black over green to light turquoise with
shades of green in between.
GRAYscale
Shows the results in shades of gray.
*RST:
HOT
Example:
DISP:WIND:SPEC:COL GRAY
Changes the color scheme of the spectrogram to black and
white.
Manual operation:
See
" Hot / Cold / Radar / Grayscale "
14.8.2.3
Using Trace Mathematics
The following commands control trace mathematics.
CALCulate<n>:MATH<t>[:EXPRession][:DEFine]
.............................................................. 972
......................................................................................973
...................................................................................973
...................................................................................... 974
CALCulate<n>:MATH<t>[:EXPRession][:DEFine]
<Expression>
This command selects the mathematical expression for trace mathematics.
Before you can use the command, you have to turn trace mathematics on.
Suffix:
<n>
.
<t>
irrelevant
Parameters:
<Expression>
(TRACE1-TRACE2)
Subtracts trace 2 from trace 1.
Analyzing Measurements (Basics)
