Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
360
User Manual 1173.9240.02 ─ 23
Before you can use the command, you have to select a limit line with
Suffix:
<n>
.
irrelevant
<k>
Parameters:
<State>
ON | OFF | 1 | 0
*RST:
0
Manual operation:
See
CALCulate<n>:LIMit<k>:LOWer:THReshold
<Threshold>
This command defines a threshold for relative limit lines.
The R&S
FSW uses the threshold for the limit check, if the limit line violates the thresh-
old.
Suffix:
<n>
.
irrelevant
<k>
Parameters:
<Threshold>
Numeric value.
The unit depends on
on page 360.
*RST:
-200 dBm
Manual operation:
See
CALCulate<n>:LIMit<k>:NAME
<Name>
This command selects a limit line that already exists or defines a name for a new limit
line.
Suffix:
<n>
.
<k>
Parameters:
<Name>
String containing the limit line name.
*RST:
REM1 to REM8 for lines 1 to 8
Manual operation:
See
CALCulate<n>:LIMit<k>:UNIT
<Unit>
This command defines the unit of a limit line.
Analyzing Results