manualshive.com logo in svg

R&S FSW-K7, User Manual

The R&S FSW-K7 is a high-quality spectrum analyzer that provides accurate and reliable measurements. To access the User Manual for this product, simply download it for free from our website. This comprehensive manual offers detailed instructions on how to utilize the features of the R&S FSW-K7 effectively.

Share
Download
background image

Index

R&S

®

FSW-K7

397

User Manual 1173.9240.02 ─ 23

Index

 

Symbols

*OPC ............................................................................... 256

A

A weighted filter

AF filters ....................................................................118

Aborting

Sweep ............................................................... 107, 108

AC/DC coupling .............................26, 54, 91, 111, 121, 128
Activating

Analog Demodulation measurements (remote) ........ 183

Active probe

Microbutton ................................................................. 71

AF ......................................................................................13
AF Auto Scale

Y-axis ................................................................ 122, 132

AF center

Demodulation spectrum ............................................ 114

AF CF ................................................................................ 12
AF coupling ..................................................... 111, 121, 128
AF filters ............................................................................ 27

A weighted ................................................................ 118
CCIR ......................................................................... 118
CCITT ....................................................................... 118
Configuration ............................................................ 116
Deactivating .............................................................. 119
Deemphasis .............................................................. 119
High pass .................................................................. 117
Low pass ...................................................................117
Weighting .................................................................. 118

AF full span

Demodulation spectrum ............................................ 114

AF span

Demodulation spectrum ............................................ 114
Displayed .................................................................... 12
Remote control ......................................................... 271

AF spectrum .................................................................... 113
AF start

Demodulation spectrum ............................................ 114

AF stop

Demodulation spectrum ............................................ 114

AF trigger .................................................................... 27, 28
Alignment

B2000 ......................................................................... 80

All Functions Off .............................................................. 154
AM (Offline)

Softkey ...................................................................... 100

AM Spectrum

Evaluation method ...................................................... 16

AM Time Domain

Evaluation method ...................................................... 13

Amplitude

Analog Baseband Interface (B71) settings ................. 92
Configuration (Softkey) ............................................... 88
Scaling ...................................................................... 123
Settings ................................................................. 87, 88

Analog Baseband

Amplitude settings ...................................................... 92
Input ............................................................................ 55
Input settings .............................................................. 68

Analog Baseband (B71)

Full scale level ............................................................ 94
I/Q mode ..................................................................... 68
Input type (remote control) ........................................211

Analog Baseband connector

RF input ...................................................................... 31

Analog Baseband Interface (B71)

Amplitude settings ...................................................... 92
Input settings .............................................................. 68

Analog Demodulation

Measurement examples ........................................... 170
Output ....................................................................... 128
Output settings ..........................................................127

Analysis

Marker functions ....................................................... 146
Remote control ......................................................... 319
Settings ..................................................................... 133

Analysis interval

Configuration (MSRA, remote) ......................... 370, 372
MSRA/MSRT .................................................... 105, 251

Analysis line ...................................................................... 46

Configuration ............................................................ 161
Configuration (MSRA, remote) ......................... 370, 372

Application cards ................................................................. 7
Application notes ................................................................. 7
APX

External generator ................................................ 38, 43

AQT

see Measurement time ............................................... 11

ASCII trace export ........................................................... 317
Attenuation ........................................................................ 90

Auto ............................................................................ 90
Displayed .................................................................... 11
Electronic .................................................................... 90
Manual ........................................................................ 90
Option ......................................................................... 90
Protective  ................................................................... 30
Protective (remote) ................................................... 189

Audio demodulation

Volume (remote control) ........................................... 241

Audio frequency

see AF ........................................................................ 13

Auto adjustment

Triggered measurement ........................................... 285

Auto all ............................................................................ 130
Auto frequency ................................................................ 130
Auto ID

External Mixer ............................................................. 60
External Mixer (remote) ............................................ 193
Threshold (External Mixer, remote control) .............. 194
Threshold (External Mixer) ......................................... 60

Auto level

Hysteresis ......................................................... 131, 132
Reference level ............................................. 89, 94, 131
Softkey .......................................................... 89, 94, 131

Auto scaling .....................................................122, 123, 132
Auto settings ................................................................... 129

Meastime Auto .......................................................... 131
Meastime Manual ..................................................... 131

Automatic coupling

Frequencies, external generator ........................... 41, 75

AUX control

TTL synchronization, external generator .................... 33

Summary of Contents for FSW-K7
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for FSW-K7

Samsung ML-1610 - B/W Laser Printer Manual preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 18
Samsung ML 3471ND - B/W Laser Printer Manual preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 27
Samsung MFP SCX-6345N User Manual preview
MFP SCX-6345N
Brand: Samsung Pages: 49
MACROMEDIA COLDFUSION MX 61-CFML Quick Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 34
Omron FLEXXPECT-PHARMA Brochure preview
FLEXXPECT-PHARMA
Brand: Omron Pages: 2
Crestron CRESTRON-APP-SSTV Operations & Installation Manual preview
CRESTRON-APP-SSTV
Brand: Crestron Pages: 28
Juniper JUNOSE 11.2 Configuration Manual preview
JUNOSE 11.2
Brand: Juniper Pages: 772
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
VDO TIS OFFICE Brochure preview
TIS OFFICE
Brand: VDO Pages: 8
Red Hat DEVICE-MAPPER MULTIPATH 4.6 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 4.6
Brand: Red Hat Pages: 42
Fermax Wi-BOX Manual preview
Wi-BOX
Brand: Fermax Pages: 8
DigiDesign Trillium Lane Labs Manual preview
Trillium Lane Labs
Brand: DigiDesign Pages: 114
Campbell CSIOPC Instruction Manual preview
CSIOPC
Brand: Campbell Pages: 24
Campbell PC208W Instruction Manual preview
PC208W
Brand: Campbell Pages: 156
Harman Aha Operating Instructions Manual preview
Aha
Brand: Harman Pages: 8
ADS Technologies USBAV-701 Install Manual preview
USBAV-701
Brand: ADS Technologies Pages: 12
Baracoda Manager V3.36.2 Install Manual preview
Manager V3.36.2
Brand: Baracoda Pages: 9
Zeh Graphic Systems 1050c - DesignJet Plus Color Inkjet Printer Manual preview
1050c - DesignJet Plus Color Inkjet Printer
Brand: Zeh Graphic Systems Pages: 2

Brands by name

Popular brands

Load more brands