manualshive.com logo in svg

R&S FSW-K7, User Manual

The R&S FSW-K7 is a high-quality spectrum analyzer that provides accurate and reliable measurements. To access the User Manual for this product, simply download it for free from our website. This comprehensive manual offers detailed instructions on how to utilize the features of the R&S FSW-K7 effectively.

Share
Download
background image

Index

R&S

®

FSW-K7

402

User Manual 1173.9240.02 ─ 23

Marker peak list

see Peak list ............................................................. 151

Marker table

Evaluation method ...................................................... 22

Marker to Trace ............................................................... 141
Markers

Assigned trace .......................................................... 141
Basic settings ............................................................138
Configuration .................................................... 138, 141
Configuration (remote control) .................................. 319
Deactivating .............................................................. 141
Delta markers ........................................................... 140
Fixed reference (remote control) ...................... 327, 344
Function configuration .............................................. 146
Linked in AF spectrum display .................................. 142
Linked in time domain ............................................... 142
Linking ...................................................................... 140
Minimum ................................................................... 145
Minimum (remote control) ......................................... 339
n dB down ................................................................. 154
n dB down (remote control) ...................................... 350
Next minimum ........................................................... 145
Next minimum (remote control) ................................ 339
Next peak ..................................................................144
Next peak (remote control) ....................................... 339
Noise .........................................................................145
Peak ..........................................................................144
Peak (remote control) ............................................... 339
Peak list (remote control) .......................................... 346
Phase noise measurement ....................................... 147
Phase noise measurement (remote control) ............. 353
Position ..................................................................... 140
Positioning ................................................................ 144
Positioning (remote control) ...................................... 319
Querying position (remote) ....................................... 322
Remote control ......................................................... 319
Search settings (remote) .......................................... 338
Setting up (remote control) ....................................... 319
Spectrograms (remote control) ................................. 329
State ......................................................................... 139
Step size ................................................................... 142
Step size (remote control) .........................................327
Table ......................................................................... 141
Table (evaluation method) .......................................... 22
Table (remote control) .............................................. 327
Type .......................................................................... 140
X-value ......................................................................140

Maximizing

Windows (remote) .....................................................300

Measurement accuracy

External generator ...................................................... 38

Measurement channel

Creating (remote) ..............................................183, 184
Deleting (remote) ...................................................... 184
Duplicating (remote) ................................................. 183
Querying (remote) .....................................................184
Renaming (remote) ................................................... 186
Replacing (remote) ................................................... 184

Measurement examples

Analog Demodulation ............................................... 170

Measurement time .................................................. 106, 109

Auto settings ............................................................. 131
Displayed .................................................................... 11
Effects ......................................................................... 28
Power sensor .............................................................. 85
Value range ................................................................ 27

Microbutton

Probes ........................................................................ 71

Minimum ..........................................................................145

Marker positioning .................................................... 145
Next .......................................................................... 145

Mixer Type

External Mixer ............................................................. 57

MKR

Key ............................................................................138

MKR ->

Key ....................................................................143, 144

MKR FUNCT

Key ............................................................................146

Modulation

Depth .......................................................................... 22
Depth, scaling ........................................................... 120
Frequency ............................................................. 21, 26

MSRA

Analysis interval ........................................................ 251
Operating mode .......................................................... 45
Restriction ................................................................. 294

MSRA slave applications

Capture offset (remote) .............................................371

MSRA/MSRT

Analysis interval ........................................................ 105

MSRT

Analysis interval ........................................................ 251
Operating mode .......................................................... 45
Restriction ................................................................. 294

MSRT slave applications

Capture offset ........................................................... 106
Capture offset (remote) .............................................373

Multiple

Measurement channels .............................................. 10

N

n dB down

Delta value ................................................................ 154
Marker .......................................................................154
Remote control ......................................................... 350

Name

Limit lines .................................................................. 158

Next Minimum ................................................................. 145

Marker positioning .................................................... 145

Next Peak ........................................................................144

Marker positioning .................................................... 144

Noise

Density ...................................................................... 145
Marker .......................................................................145
Source ................................................................ 44, 127

NOR

External generator ................................................ 38, 43

Normalization

Approximate, external generator ................................ 38
External generator ................................................ 38, 77

Number of Readings

Power sensor .............................................................. 86

Numerator

Frequencies, external generator ........................... 41, 75

O

Offset

Analysis interval ........................................................ 106
Reference level ..................................................... 89, 93

Online help .......................................................................... 6

Summary of Contents for FSW-K7
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for FSW-K7

Canon iR2270 Series Product Description preview
iR2270 Series
Brand: Canon Pages: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Brand: Canon Pages: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Brand: Canon Pages: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Brand: Canon Pages: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Brand: Canon Pages: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Brand: Canon Pages: 109
Canon PowerShot G10 - Digital Camera - Compact Software User'S Manual preview
PowerShot G10 - Digital Camera - Compact
Brand: Canon Pages: 49
Waves API 550 User Manual preview
API 550
Brand: Waves Pages: 20
F-SECURE MOBILE SECURITY 6 FOR S60 - User Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 37
Juniper JUNOSE 11.2 Configuration Manual preview
JUNOSE 11.2
Brand: Juniper Pages: 772
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 4.0 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 4.0
Brand: Red Hat Pages: 92
F-SECURE ANTI-VIRUS FOR WINDOWS SERVERS 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR WINDOWS SERVERS 9.00
Brand: F-SECURE Pages: 48
ARTEX 570-2225 Manual preview
570-2225
Brand: ARTEX Pages: 33
COMPRO Y-C User Manual preview
Y-C
Brand: COMPRO Pages: 8
Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual preview
CERTIFICATE SYSTEM 7.3 - ADMINISTRATION
Brand: Red Hat Pages: 554
M-Audio Torq User Manual preview
Torq
Brand: M-Audio Pages: 88
Capcom Xbox360 MotoGP08 User Manual preview
Xbox360 MotoGP08
Brand: Capcom Pages: 28
Intel Active Management Technology v4.0 Administrator'S Manual preview
Active Management Technology v4.0
Brand: Intel Pages: 143

Brands by name

Popular brands

Load more brands