Instrument Functions
R&S
®
NGE100B
44
User Manual 5601.1343.02 ─ 02
The
Enter
key is illuminated.
9. Press
Output
key to enable R&S NGE100B output.
10. Press
Enter
key to start the EasyArb function.
11. Long press on the
Enter
key to stop the EasyArb function.
Table 5-9: EasyAab input field
EasyArb input field
Description
EasyArb Mode
Enable or disable the EasyArb function.
If enabled, the EasyArb function is activated in Ch 1.
See
Data Points
Set the number of data points in the EasyArb table.
Each data point contains the settings for "Voltage",
"Current" and "Duration".
Repetition
Set the number of times the waveform is output in
the EasyArb table. If this is set to "0", the waveform
is output continuously.
EasyArb table
Configures the EasyArb data table. Use the arrow
keys to navigate the "Voltage", "Current" and "Dura-
tion" settings.
Clear
Reset all the data points in the EasyArb table to
0.00 V, 1.000 A and 0.01 s for "Voltage", "Current"
and "Duration" respectively.
Apply
Select "Apply" to save EasyArb configuration.
5.5.4
EasyRamp
With EasyRamp, the R&S NGE100B provides you the operating condition to output a
constant rise of the supply voltage. The output voltage can be increased continuously
within a 10 ms to 10 s timeframe. See
Figure 5-17: Ramping voltage output
Advanced Functions
www.allice.de
Allice Messtechnik GmbH
